Global site
ACR Machine Tool
Bangladesh TCK56A/500 inclined bed CNC lathe
Category:
BangladeshCNC lathe with inclined bed body
Product Description
1 Structural characteristics and functional requirements of machine tools
1.1 This series of machine tools is a mature product mainly exported by Shandong Ekerui Machine Tool Co., Ltd. It has a compact structure, beautiful appearance, large spindle torque, high rigidity, stable and reliable performance, and excellent accuracy retention.
1.2 High-speed, high-precision and high-rigidity cartridge spindle unit and servo spindle motor can achieve higher spindle speeds. It is suitable for turning disc and shaft parts. It can process straight lines, arcs, metric and inch threads, and multi-start threads. It is also suitable for turning disc and shaft parts with complex shapes and high precision requirements.
1.3 It adopts a 45° overall inclined bed structure and is equipped with high-precision preloaded Taiwan linear rolling guides. The machine tool has high position accuracy, smooth chip removal, and is suitable for high-speed and high-precision machining.
1.4 The CNC system adopts GSK988T system, using domestic famous ball screws and high-precision screw bearings.
1.5 The spindle adopts a high-precision spindle bearing set and has been precision assembled and dynamically balanced tested to ensure high spindle accuracy, low noise and strong rigidity.
1.6 Each lubrication point uses a forced automatic lubrication device to lubricate the screw and guide rail at fixed points and quantitatively . When there is an abnormal state or insufficient oil, a warning signal is automatically generated.
The 1.7 comes standard with a domestic three-jaw self-centering hydraulic chuck.
1.8 The guide rail is equipped with a stainless steel protective device to prevent the guide rail from being corroded by iron filings and coolant, and facilitates the cleaning of iron filings.
2. Main technical parameters of the machine tool:
|
project |
unit |
Specification |
Remark |
||
|
Maximum rotation diameter of the bed |
mm |
Φ 560 |
|
||
|
Maximum cutting length |
mm |
500 |
|
||
|
Maximum cutting diameter |
mm |
Disc type Φ 400 Shaft type Φ 350 |
|
||
|
Maximum rotation diameter on the skateboard |
mm |
Φ 350 |
|
||
|
Spindle end type and code |
|
A2-6 _ |
Front taper hole 1:20 |
||
|
Spindle hole diameter |
mm |
Φ 65 |
|
||
|
Maximum bar diameter |
mm |
Φ 50 |
Hollow chuck available |
||
|
single spindle Headstock |
Spindle speed range |
r/min/Nm |
50～ 3500 _ |
hypersync |
|
|
Main motor Output Power |
30 minutes / continuous |
kW |
11 |
|
|
|
Standard chuck |
Chuck diameter |
inch |
8² _ |
|
|
|
X- axis rapid movement speed |
m/min |
30 |
Rolling guide |
||
|
Z- axis rapid movement speed |
m/min |
30 |
Rolling guide |
||
|
X- axis travel |
mm |
210 |
|
||
|
Z- axis travel |
mm |
560 |
|
||
|
Tailstock travel |
mm |
450 |
Cylinder drive line rail ( optional servo drive ) |
||
|
Tailstock spindle taper hole taper |
Mohs |
Mo 5 |
|
||
|
Standard tool holder form |
|
Horizontal 8-station |
|
||
|
Tool size |
External round knife |
mm |
2 5 × 2 5 |
|
|
|
Boring bar diameter |
mm |
Ф40/Ф32/Ф25/Ф20 |
|
||
|
Is it possible to choose the knife from the knife disc nearby? |
|
yes |
|
||
|
Machine weight |
total weight |
kg |
40 00 |
|
|
|
weight capacity |
disk type parts |
kg |
200 (including chuck and other machine tool accessories) |
|
|
|
Shaft parts |
kg |
5 00 (including chuck and other machine tool accessories) |
|
||
|
Machine tool appearance |
Length ×width×height |
mm |
2750×2000×1900 |
Does not include chip conveyor |
|
3. Standard configuration of machine tools and main purchased parts:
|
Accessory kit name |
Specifications and models |
Manufacturer |
Remark |
|
CNC system |
GSK988T |
Guangshu |
Guangzhou |
|
Main motor |
11KW |
hypersync |
Beijing |
|
X- axis motor ( with brake ) |
βiSc12/3000 -B (with brake) |
FANUC |
Japan |
|
Z- axis motor |
βiSc12 /3000 |
FANUC |
Japan |
|
Spindle bearings |
90X140X37 |
import |
NSK/NTN (Japan) |
|
100X150X37 |
|||
|
100X150X45 |
|||
|
X-axis ball screw |
φ32×12-635 |
Nanjing Craftsmanship |
Nanjing (optional silver) |
|
Z-axis ball screw |
φ32×12-1042 |
Nanjing Craftsmanship |
Nanjing (optional silver) |
|
X-axis guide rail |
35 specifications |
import |
HIWIN (Taiwan) /THK (Japan) |
|
Z-axis guide rail |
35 specifications |
import |
HIWIN (Taiwan) /THK (Japan) |
|
Tailstock guide |
35 specifications |
import |
HIWIN (Taiwan) /THK (Japan) |
|
X-axis screw bearing |
25X62X15 _ |
import |
NSK/NTN (Japan) |
|
Z-axis screw bearing |
25X62X15 _ |
import |
NSK/NTN (Japan) |
|
Hydraulic chuck |
8 inches hollow |
KPT |
Changzhou |
|
tailstock |
Hydraulic tailstock |
Domestic |
|
|
Tailstock thimble |
MT5 |
import |
|
|
Knife holder |
Horizontal 8-station hydraulic tool holder |
Domestic |
Little King Kong (optional Taiwan Swift) |
|
Cooling chip removal device |
Chain plate chip conveyor |
Domestic |
Optional |