Global site
ACR Machine Tool
Barbados TCK6350 inclined bed CNC lathe
Category:
BarbadosCNC lathe with inclined bed body
Product Description
1. Main structural features of machine tools:
This machine tool is a high-speed, high-precision and high-reliability inclined bed machine tool. The main components such as the bed base, bed bed, and headboard are all cast from high-strength materials to ensure the stability of the machine tool for long-term use.
Adopting a 45° overall inclined bed structure and equipped with high-precision preloaded Taiwan linear rolling guides, the machine tool has high positional accuracy, smooth chip removal, and is suitable for high-speed and high-precision machining.
High-speed, high-precision and high-rigidity cartridge-type spindle unit and servo spindle motor can achieve higher spindle speeds. The spindle unit is assembled in a constant temperature room. After assembly, it undergoes constant temperature running-in for 72 hours. After being put on the machine, it undergoes a continuous 72-hour test run to ensure the reliability of high-speed and high-precision performance.
Using the tool arrangement method, the tool changing speed is fast and the positioning accuracy is high.
The X/Z-direction servo motor is directly connected to the screw through a high-torque, low-inertia elastic coupling. The screw support adopts a pre-stretched structure, which can eliminate transmission backlash and pre-compensate for the impact of thermal deformation on accuracy during long-term operation of the machine tool. Ensure positioning accuracy and repeated positioning accuracy; adopt advanced centralized automatic lubrication device, regular and quantitative automatic intermittent lubrication, and work stably and reliably.
The machine tool adopts Guangshu 980TDC system, which is more convenient to use.
The machine tool protection adopts a full protection design, which is highly pleasant, unique in appearance, reliable in waterproofing and chip prevention, and easy to maintain.
2. Main technical parameters
|
Machine model |
unit |
TCK6350 |
|
Maximum rotation diameter of the bed |
mm |
Φ520 |
|
Maximum rotation diameter of cross slide |
mm |
Φ220 |
|
Maximum processing length |
mm |
410 (with row of knives) 330 (with turret) |
|
Standard chuck specifications |
inch |
12″ |
|
X-axis maximum travel |
mm |
500 |
|
Z-axis maximum travel |
mm |
500 |
|
Spindle maximum speed |
rpm |
3000rpm |
|
Spindle speed change |
|
Infinitely variable speed |
|
Spindle end code |
|
A2-8 |
|
Spindle through hole diameter |
mm |
Φ 66 |
|
Spindle tube inner diameter |
mm |
Φ 55 |
|
Rapid traverse speed |
m/min |
X:18 Z:18 |
|
cutting feed rate |
mm/min |
1-15000 |
|
X/Z direction motor torque |
NM |
7.5/7.5 (X direction with brake) |
|
Spindle motor power |
KW |
11 |
|
Toolbar section |
mm |
25×25 |
|
Knife holder |
|
4 |
|
Total power capacity |
KVA |
twenty two |
|
Cutting water tank capacity |
L |
90 |
|
Overall dimensions (length × width × height) |
mm |
2500×1620×1890 |
|
Total Weight |
KG |
2900 |
3. Main configuration list
|
name |
Specifications and models |
quantity |
brand |
Origin |
|
Control System |
980TDC |
1 set |
Guangshu |
Domestic |
|
Spindle unit |
Φ 2 00 |
1 set |
Heiner |
Domestic |
|
Screw bearing |
|
1 set |
Xinha |
Domestic |
|
Dota |
4 workstations |
1 set |
Yaxing |
Domestic |
|
Spindle motors and drives |
Servo main motor ( 11KW ) |
1 set |
Guangshu |
Domestic |
|
guide |
Linear Guides |
1 set |
Intime |
Taiwan |
|
ball screw |
3210-03 |
1 set |
Northern Qishan |
Domestic |
|
Automatic lubrication device |
HR-3 |
1 set |
Hurun |
Domestic |
|
hydraulic station |
|
1 set |
blessed |
Nanjing |
|
Hydraulic chuck |
Hollow 12 〃 |
1 set |
Three six |
Domestic |
|
cooling pump |
|
1 set |
|
Domestic |