Global site
ACR Machine Tool
Bangladesh TCK36A Line Rail Oblique Bed CNC Lathe
Category:
BangladeshCNC lathe with inclined bed body
Product Description
1. Main structural features of machine tools:
This machine tool is a high-speed, high-precision and high-reliability inclined bed machine tool. The main components such as the bed base, bed bed, and headboard are all cast from high-strength materials to ensure the stability of the machine tool for long-term use.
Adopting a 45° overall inclined bed structure and equipped with high-precision preloaded Taiwan linear rolling guides, the machine tool has high positional accuracy, smooth chip removal, and is suitable for high-speed and high-precision machining.
High-speed, high-precision and high-rigidity cartridge-type spindle unit and servo spindle motor can achieve higher spindle speeds. The spindle unit is assembled in a constant temperature room. After assembly, it undergoes constant temperature running-in for 72 hours. After being put on the machine, it undergoes a continuous 72-hour test run to ensure the reliability of high-speed and high-precision performance.
Using the tool arrangement method, the tool changing speed is fast and the positioning accuracy is high.
The X and Z direction feeds use servo motors directly connected to the screw through high-torque and low-inertia elastic couplings. The screw support adopts a pre-stretched structure, which can eliminate transmission backlash and pre-compensate for the thermal deformation of the machine tool during long-term operation. influence to ensure positioning accuracy and repeated positioning accuracy; it adopts advanced centralized automatic lubrication device, timing and quantitative automatic intermittent lubrication, and the work is stable and reliable.
The machine tool protection adopts a full protection design, which is highly pleasant, unique in appearance, reliable in waterproofing and chip prevention, and easy to maintain.
2. Main technical parameters
|
part |
project |
T K 3 6 A |
|
The main parameters |
Maximum upper turning diameter of bed surface |
Φ 3 60mm |
|
Spindle and chuck parameters |
Maximum processing diameter on tool holder |
Φ 1 70mm |
|
Maximum processing length |
300mm _ |
|
|
Spindle head form |
A2-5 |
|
|
Clamping form |
Hydraulic chuck |
|
|
Feed part parameters |
Spindle motor power ( KW ) |
3.7 _ |
|
Spindle maximum speed |
4000rpm _ |
|
|
Appearance |
Spindle through hole diameter |
Φ 48 mm |
|
X-axis limit travel |
3 10mm |
|
|
X-axis motor torque |
6 N.M. |
|
|
X/Z axis rail specifications |
30/30 |
|
|
Z axis limit travel |
3 50mm |
|
|
Z-axis motor torque |
6NM _ |
|
|
X, Z axis connection method |
Direct |
|
|
Bed form and slope Overall dimensions (length × width × height) |
2 15 0× 1 5 0 0× 1 7 5 0 |
|
|
weight |
Weight (approximately) |
2 6 00 kg |
3. Main configuration list
|
name |
Specifications and models |
quantity |
brand |
Origin |
|
Control System |
980TC3 |
1 set |
Guangshu |
Guangzhou |
|
Spindle unit |
φ 140 |
1 set |
|
Domestic |
|
Special bearings for lead screw |
|
1 set |
Ha axis |
Domestic |
|
Spindle motor |
3.7 KW servo |
1 set |
Guangshu |
Guangzhou |
|
Rail type |
Linear roller guide |
1 set |
Yintai / Shanghai Yin |
Taiwan |
|
ball screw |
3210 |
1 set |
Qishan |
Domestic |
|
Hydraulic tool holder type |
8- station horizontal turret |
1 set |
Yaxing |
Domestic |
|
Automatic lubrication device |
HR-3 |
1 set |
Hurun |
Domestic |
|
hydraulic station |
0.75kW/40L |
1 set |
|
Domestic |
|
Hydraulic cylinder |
Hollow 6 〃 |
1 set |
Bedford |
Changzhou |
|
Hydraulic chuck |
Hollow 6 〃 |
1 set |
Bedford |
Changzhou |
|
cooling pump |
DB-12 |
1 set |
Zhejiang |
Domestic |