Global site
ACR Machine Tool
Bangladesh CK6130 CNC lathe with flat bed
Category:
BangladeshFlat bed CNC lathe
Product Description
1 Structural characteristics and functional requirements of machine tools
1.1 This series of machine tools is a mature product mainly exported by Shandong Ekerui Machine Tool Co., Ltd. It has a compact structure, beautiful appearance, large spindle torque, high rigidity, stable and reliable performance, and excellent accuracy retention.
1.2 The optimized design of the headstock is suitable for turning discs and shafts. It can process straight lines, arcs, metric threads, and multi-start threads. It is suitable for turning discs and shafts with complex shapes and high precision requirements. Parts Processing.
1.3 The machine tool guide rails and saddle guide rails are made of hard guide rails made of special materials. After high-frequency quenching, they are super hard and wear-resistant, durable and have good machining accuracy maintenance.
1.4 The CNC system adopts GSK980TC3 system, using domestic famous ball screws and high-precision screw bearings.
1.5 The spindle adopts a high-precision spindle bearing set and has been precision assembled and dynamically balanced tested to ensure high spindle accuracy, low noise and strong rigidity.
1.6 Each lubrication point uses a forced automatic lubrication device to lubricate the screw and guide rail at fixed points and quantitatively . When there is an abnormal state or insufficient oil, a warning signal is automatically generated.
The 1.7 comes standard with a domestic three-jaw self-centering manual chuck.
1.8 The guide rail is equipped with a scraping device to prevent the guide rail from being corroded by iron filings and coolant, and facilitate the cleaning of iron filings.
2. Main specifications and parameters of machine tools
|
serial number |
project |
unit |
parameter |
||
|
|
|
|
CK6130 |
||
|
1 |
Maximum rotation diameter of the bed |
mm |
Φ300 |
||
|
2 |
X guide rail span |
mm |
160 |
||
|
3 |
Z guide rail span |
mm |
230 |
||
|
4 |
Maximum rotation diameter on the slide |
mm |
Φ100 |
||
|
5 |
Center distance |
mm |
350 |
||
|
6 |
Maximum turning length |
mm |
230 |
||
|
7 |
Center high |
Distance from bed |
mm |
150 |
|
|
|
|
from the ground |
mm |
1065 |
|
|
8 |
Spindle through hole diameter |
mm |
Φ48 |
||
|
9 |
Bar diameter |
mm |
Φ45 |
||
|
10 |
Equipped with hollow chuck tie rod through hole |
mm |
Φ40 |
||
|
11 |
Spindle end type |
|
A2-5 |
||
|
12 |
chuck |
mm |
Chuck /Φ160 manual chuck (optional) |
||
|
13 |
Spindle taper hole taper |
No |
chuck |
||
|
14 |
Spindle limit speed |
rpm |
2500 |
||
|
15 |
Tailstock sleeve diameter |
mm |
Φ52 |
||
|
16 |
Tailstock sleeve inner hole taper |
No |
MT4# |
||
|
17 |
Tailstock sleeve travel |
mm |
80 |
||
|
18 |
Tailstock configuration |
|
Ordinary hand crank |
||
|
19 |
Number of knives in electric tool holder |
Bundle |
4 |
||
|
20 |
Knife size |
mm |
□20×20(four stations) |
||
|
twenty one |
Lead screw model |
X direction |
mm |
FDC2506-P3 |
|
|
|
|
Z direction |
mm |
FDC3210-P3 |
|
|
twenty two |
X/Z rapid movement speed |
m/min |
6/10 |
||
|
twenty three |
X-direction travel |
mm |
280 |
||
|
twenty four |
Minimum setting unit |
mm |
0.001 |
||
|
25 |
main motor power |
KW |
4 |
||
|
26 |
Total power |
KW |
10 |
||
|
27 |
Machine tool net weight |
Kg |
1700 |
||
|
28 |
Overall dimensions (length × width × height) |
mm |
2200×1160×1620 |
||
3. Main configuration of machine tools
|
Standard configuration |
sequence |
name |
quantity |
Standard configuration |
|
|
Number |
|
|
|
|
|
1 |
CNC system |
1 set |
Guangshu 80T B3 |
|
|
2 |
Clamping method |
1 set |
160 manual three-jaw chuck or chuck |
|
|
3 |
tailstock |
1 set |
Manual tailstock |
|
|
4 |
X- direction ball screw |
1 set |
Domestic |
|
|
5 |
Z- direction ball screw |
1 set |
Domestic |
|
|
6 |
Four-station electric tool holder |
1 set |
LD4B-CK0625 |
|
|
7 |
X , Z direction screw bearings |
1 set / unit each |
Domestic |
|
|
8 |
X , Z direction coupling |
1 set / unit each |
Domestic outsourcing |
|
|
9 |
Spindle bearings |
1 set / unit |
Domestic |
|
|
10 |
fuselage casting |
1 set |
Cast with high quality resin sand |
|
|
11 |
Spindle assembly |
1 set / unit |
Assembled spindle |
|
|
12 |
paint |
1 set / unit |
The color can be configured according to customer requirements. If there are no special requirements, it will be configured according to our company's standard color. |
|
|
13 |
lubricating |
1 set / unit |
Domestic electric lubricating oil pump, lubricating oil circuit installed |
|
|
14 |
appendix |
1 set / unit each |
|